STAL + FOAM
PRODUCT SPECIFICATIONS A-weight Aluminium Oxide foam-backed paper, semi-open coated, stearate, grits from P120 to P400.
Available as roll or as sheets, with foam thickness 4 or 8 mm.
USE Sanding solvent-based acrylic and polyacrylic paints and polyester paints with manual sanders on curved components.
PRODUCT SPECIFICATIONS C/D-weight Aluminium Oxide paper (D weight up to P120), open coated, Top Size additive, grit range from P40 to P1500, except for P50.
USE Sanding solvent-based acrylic and polyacrylic paints and polyester paints with manual sanders on curved components; also suitable for sanding direct or brushed solvent-based polyurethane lacquers with manual sanders on curved components and for primer sanding and clear coats mattening in the automotive industry.
PRODUCT SPECIFICATIONS X-weight, tough cotton cloth with Silicon Carbide, open coated, grit P12.
USE Production of wooden floors; on sanding machine with cross group operator it allows to get a special finish ‘saw effect’; on sanding machine with longitudinal group operator it allows to get the special finish ‘scratched effect’ by Finishing Lab.
PRODUCT SPECIFICATIONS F-weight Aluminium Oxide cotton cloth, semi-open coated, grit range from P280 to P500, except P360.
USE Sanding wood in general and sanding polyurethane and polyester paints on shaped profiles and edges where a flexible support is needed; also suitable as antiwaste cloth for manual sanding of lathed and shaped details.
PRODUCT SPECIFICATIONS Special multifunctional discs for dry or wet microsanding, with a fabric backing coated with Silicon Carbide, doubled with flexible foam. Available in the grits P1000, P2000, P3000, P4000.
USE Thanks to the soft flexible backing the disk can adapt to curved surfaces and sharp edges, avoiding the risk of pressure marks. This multipurpose product can be used on a wide range of materials: aluminium, massive wood, steel, non ferrous metal, varnish, paints, fillers, composites materials.
PRODUCT SPECIFICATION Soft abrasive discs with a revolutionary hookit backing composed by fabric laminated with ultra breathable flexible foam, suitable for hookit pads with any number of holes. The ultra breathable weave allows a total dust vacuuming, fostering a better work environment; transpiration also decreases sanding temperature and enhances resistance to clogging ensuring a longer lifespan and a finishing quality without comparisons. Available in 7 colors corresponding to the 7 different grits from the finest to the coarsest: yellow, green, red, orange, purple, blue, white; standard diameter 150 mm, on request also with diameters 35 and 77 mm.
USE Paint mattening and blending, AbraSilk soft is ideal for homogeneous surface preparation to polishing, to be used both dry and wet.
PRODUCT SPECIFICATIONS Special abrasive belt with a layer of Aluminium Oxide (A) or Silicon Carbide (S) Nonwoven abrasive, with a poly-cotton cloth backing, available in the grits A/Very Fine or S/Ultra Fine.
USE In the wood industry to obtain the special finish ‘pickled effect’ by Finishing Lab; in the metal industry to satinize.