MANUAL POLISHING COMPOUND
PRODUCT SPECIFICATIONS New generation of manual polishing compound, silicon-free, for an effective high gloss polishing, without leaving products residues or holograms.
Available in the following grits:
Coarse 1000/1200 – RED
Medium 1200/1500 – GREEN
Fine 1500/2000 – ORANGE
USE Polishing compounds ideal to remove scratches, re-fresh weathered clear coats and for final finishes.
BENEFITS Increase productivity, reduce labor time and labor costs, enhance final high gloss surface finish, avoid swirl and blom marks as well as holograms when used with orbital motion polisher.
PRE CUT ROLLS
PRODUCT SPECIFICATIONS Pre cut rolls of A-weight Silicon Carbide abrasive paper, open coated. Each roll has 200 cuts sized 153 x 81 mm. Grits from P150 to P400. 5 rolls pack.
USE For manual sanding of wooden furnitures, ornaments, frames, plasters, edges and moldings; also suitable on paints, varnishes and plastic.
AUTOADHESIVE MINIDISCS
PRODUCT SPECIFICATIONS Silicon Carbide microabrasive autoadhesive discs with waterproof film backing. 32 mm diameter, 1000 discs per roll. Available in grits from P1500 to P3000 and P5000.
USE For sanding paints, fillers and varnishes, also suitable on lens in the optical industry or on precious metals. To be used both wet or dry.
SANDING PADS
PRODUCT SPECIFICATIONS Special flat pad with Aluminium Oxide, dimensions 140 x 115 x 5 mm, made of ethyl vinyl acetate foam coated with abrasive minerals on a single side.
DENSITY & GRITS Available in P60, P100, P180, P220 and P280 grits, SOFT density.
USE Especially suitable for uniforming primers and plastic surfaces preparing them for the application of catalyzed paint, or for sanding hard to reach parts and for dulling varnishes; to be used wet or dry.
SANDING BLOCKS
PRODUCT SPECIFICATIONS Abrasive blocks with Aluminium Oxide, dimensions 98 x 69 x 26 mm, made of polyurethane foam with no solvents, coated with abrasive minerals on four sides.
DENSITY & GRITS Available in P60, P100 and P180 grits, STANDARD and SOFT density.
Available in “combination” type P100 grit, SOFT density.
USE Especially suitable on wood, paint and varnishes; to be used wet or dry.
SANDING SPONGES
PRODUCT SPECIFICATIONS Abrasive sponges with Aluminium Oxide, dimensions 120 x 98 x 13 mm, made of polyurethane foam with no solvents, coated with abrasive minerals on both sides.
DENSITY & GRITS Available in P60, P100, P180, P220 grits, STANDARD density.
USE Especially suitable for varnishes, catalyzed paint and common finishes; to be used wet or dry.
UNMOUNTED C&P FLAP WHEELS
PRODUCT SPECIFICATIONS Unmounted flap wheels with 76 mm hole or 19mm key-shaped hole, composed by lamellae made by Cutting & Polishing material with Aluminium Oxide, grit A/Medium, radially disposed around a fiber center.
USE These flaps are made of an extremely resistant and long lasting material, they can be used for satinizing uniformly and deburring. They are particularly suitable to work on internal radius, both on wood and on metal.
NONWOVEN DISCS
PRODUCT SPECIFICATIONS Nonwoven discs with Aluminium Oxide or Silicon Carbide, available on stock with 120, 150, 200, 250 mm diameter (on demand also in 100, 180, 300, 350, 400, 500 mm diameters) with Aluminium Oxide in the grits A/Very Fine (special, strong, soft), A/Fine, A/Medium, A/Coarse, and with Silicon Carbide in the grits S/Ultra Fine, S/Super Fine, S/Very Fine, S/Fine and S/Medium. Available also with velcro, diameters 125 and 150 mm with Aluminium Oxide in grit A/Very Fine.
USE These discs offer a constant finishing pattern and an effective ventilation, they are flexible, resistant to clogging and easy to use and they also reduce working noise. They are particularly suitable to prepare surfaces to further processes like chrome- or nickel-plating or varnishing, to remove traces of previous processes and to repair surfaces after bending and welding. To be used dry or with solid or liquid lubricants for stainless steel, normal or special steel, non-ferrous metals and alloys, aluminium, cast iron, titanium, plastic, varnishes, lacquers, fillers. Easy to clean with compressed air or water.
NONWOVEN PADS
PRODUCT SPECIFICATIONS Nonwoven pads with Aluminium Oxide or Silicon Carbide, dimensions 280 mm x 120 mm. Available with Aluminium Oxide in the grits A/Very Fine (special, strong, soft), A/Fine, A/Medium, A/Coarse, and with Silicon Carbide in the grits S/Ultra Fine, S/Super Fine, S/Very Fine, S/Fine and S/Medium.
USE Extremely flexible and easy to handle, suitable for manual operations and also to be used with random orbital sanders for the cleaning of irregular-shaped workpieces, for removing oxidations, grease and varnishes and any traces of other previous processes, especially suitable on ferrous and non-ferrous metal, stainless steel, syntetic materials, fillers and varnishes. To be used wet or dry, or with cleaning products. Easy to clean with compressed air or water.
NONWOVEN ROLLS
PRODUCT SPECIFICATIONS Nonwoven rolls with Aluminium Oxide or Silicon Carbide, 10 meters long, 120 mm height. Available with Aluminium Oxide in the grits A/Very Fine (special, strong, soft), A/Fine, A/Medium, A/Coarse, and with Silicon Carbide in the grits S/Ultra Fine, S/Super Fine, S/Very Fine, S/Fine and S/Medium.
USE To avoid waste, you can cut exactly the piece of product you need, depending on the shape of the workpiece you are going to work on. This material is very resistant to clogging and very flexible; it is especially suitable for manual operations such as removing oxidations, cleaning off grease and varnishes and for general purpose cleaning on stainless steel, common or special steel, aluminium, titanium, non-ferrous materials and alloys, glass fiber, plastic or fiberglass. Easy to clean with compressed air or water.